Knitted Wire Mesh Gaskets

//Knitted Wire Mesh Gaskets

Knitted mesh gaskets are formed by knitting Monel, Aluminium, Stainless Steel or Tin plated Copper clad Steel wire into continuous sections or strips. Using this technique a range of tough, resilient gasket sections can produced that as a result of the high number direct metal to metal contact points also offer excellent shielding performance.

Knitted wire mesh gaskets do not offer any environmental sealing on their own but can be combined with conventional elastomer gasket sections to provide both EMI shielding and environmental sealing to any required level. Please see out Twinshield section for more information.

Gasket types:

Solid mesh

Knitted mesh may be formed into various cross-sections, usually square, rectangular or round. Such sections offer very good shielding performance due to their high metal density and but require a relatively high compression force. Very often these sections are bonded to sponge rubber carrier strips to form combined seals and the overall compression force required is minimised by keeping the knitted mesh section small. Knitted mesh lengths can be joined to form complete gaskets.

Small compressed mesh gaskets in the form of washers, contact (fuzz) buttons, cylinders etc can be made by forming knitted meshed using a compression tool. These gaskets provide robust, reliable contact and are ideal for grounding applications.

Elastomer cored mesh

These gasket sections are produced by knitting wire directly over extruded elastomer cores. This gives a gasket section that has the combined benefits of good shielding performance that knitted mesh provides along with the compliance and low compression set of the elastomer core. Typically, sponge or tubular elastomer cores are used for their high compressibility.

Knitted mesh tapes (‘lay flat’)

Knitted mesh can be formed into a strip or tape up to 300mm in width, although more typically 20mm to 100mm. In this form it is ideally suited to cable shielding whereby  the tape may be ‘opened’ to a allow a cable to be threaded through or for a higher level of shielding the tape can be wound on spirally half overlapping (racing bicycle handlebar tape style).

The following ‘lay flat’ tapes are readily available as 10m or 25m rolls:

Mesh Width Part Number
Monel wire 25mm MES-MBR001-25-xx*
50mm MES-MBR001-50-xx*
TCS wire 25mm MES-TBR001-25-xx*
50mm MES-TBR001-50-xx*
*xx should be replaced with 10 or 25 for roll length

Frame mounted gaskets

Knitted mesh gaskets and where required in combination with environmental seals, can be affixed to an aluminium alloy frame. This is turn can be pre-drilled allowing a gasket assembly to be easily mounted or changed as required. The gasket sections are securely held eliminating the need to incorporate this feature on the enclosure/aperture itself.


Knitted mesh gaskets provide a reliable, high level of performance and are tolerant of harsh use and/or conditions use making them ideal for demanding applications such as

Industrial microwave oven doors
Communications cabinets
Rail infrastructure

We recommend Electromagnetic Testing Services Ltd to test EMI shielding products in your application.

For more information, please Contact Us


Product Documentation